ENGLISH
13
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
, without exceeding the
«MAX» mark.
P1019
P1018
P0004
4. Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
5. Select the desired programme
Turn the programme selector dial to the desired
position: the lights corresponding to the different
phases making up the selected programme light on.
6. Select the spin speed or option
Depress the spin speed button
to choose the
required speed or option
: the corresponding light
comes on.
900
700
500
1000
Prewash
Main wash
Rinses
Stop with water in the tub
Drain
Spin
Clogged filter
End
95°
60°
E
40°
E
40°
60°
40°
AA
30°
A
B
C
D
40°60°
30°
30°
40°
40°
30°
30°
60°
132990770 GB.qxd 11/02/2004 10:33 Pagina 13
