Electrolux EWS 83210 A, User Manual

7. Install the plastic cover (A), removed

from the top of the packaging, to the
bottom of the appliance. Remove the
adhesive strip and close the bottom of
the appliance. Attach permanently the
plastic cover to the bottom of the appli-
ance with the small plastic caps that
you can find in the user manual bag.

A

8. Pull up the appliance in vertical posi-

tion.

9. Remove the four bolts with a key. Pull

out the plastic spacers. Remove the
power supply cable and the drain hose
from the hose holders.

2

1

10. Replace the plastic spacers with the

large plastic caps. You can find these
large caps in the user manual bag.

Warning!

 Remove all the packaging

and the transit bolts before you install
the appliance.

We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.

Positioning and levelling

• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the

air circulation below the appliance.

• Make sure that the appliance does not

touch the wall or other units

• Loosen or tighten the feet to adjust the

level. A correct adjustment of the appli-
ance level prevents the vibration, noise
and the movement of the appliance when
in operation.

x4

x4

• The appliance must be level and stable.

Caution!

 Do not put cardboard, wood

or equivalent materials below the
appliance feet to adjust the level.

electrolux 

17