ted, even if the appliance is switched off. To
deactivate it, repeat the process.
“DELAY START”
This option allows you to delay the start of a
wash programme by 30, 60, 90, 2 hours to
20 hours. The selected time appears on the
display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the
“Start/Pause”
pushbutton, by pressing
the “Delay start”
pushbutton again (
’
indicates immediate start).
If you have already pressed the “Start/
Pause”
pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start the
cycle immediately, press “Start/Pause”
and then “Delay start”
. Press
“Start/Pause”
to start the cycle.
• To change the timer delay period, you
must go through the “Stop” position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
“Start/Pause”
pushbutton. After closing
the lid again, press the “Start/Pause”
pushbutton.
TIME MANAGER
The cycle can be made longer or shorter by
using the “Time Manager”
pushbuttons.
The level of soiling of the laundry is also in-
dicated.
Soil level
Icon
Type of fabric
Intensive
For heavy soiled
items
Normal
For normal soiled
items
Daily
For daily soiled items
Light
For slightly soiled
items
Quick
1)
For very slightly
soiled items
Super quick
1)
For items used or
worn for a short time
Soil level
Icon
Type of fabric
Refresh
1)
2)
For refreshing items
only
Super re-
fresh
1)
2)
For refreshing a very
few items only
1) To use on a half load.
2) The symbol flashes and disappears : this wash cycle
is a refresh cycle only.
The availability of these different levels var-
ies depending on the selected programme
type.
START OF THE PROGRAMME
Press the “Start/Pause”
pushbutton to
start the cycle ; the corresponding light will
come on green. It is normal for the pro-
gramme selector to remain stationary dur-
ing the cycle. The symbol for the current
cycle and the remaining time appear on the
display. If a delayed start has been selec-
ted, the countdown appears on the display.
The drain pump can operate for a short
time when the appliance fills water.
WARMING UP
During the cycle, the symbol comes on
when the appliance is reaching the right
temperature.
INTERRUPTING A PROGRAMME
Adding washing
When the “Add washing” light
is on, you
can add washing by proceeding as follows.
Press the “Start/Pause”
pushbutton :
the corresponding light will flash green while
the appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the
“Start/Pause”
pushbutton again to con-
tinue the programme.
Modifying the programme in progress
Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the “Start/Pause”
pushbutton. If the modification is not
possible, “Err” flashes in the display and the
“Start/Pause”
pushbutton flashes red for
a few seconds. If you still decide to change
the programme, you must cancel the cur-
rent programme (see below).
Cancelling the programme
electrolux
7
Summary of Contents for EWT 106415 W
Page 1: ...EWT 106415 W EN WASHING MACHINE USER MANUAL ...
Page 13: ...electrolux 13 ...
Page 14: ...14 electrolux ...
Page 15: ...electrolux 15 ...
