After selecting a programme, the duration is
displayed in hours and minutes ( for example
2.05
).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining
is updated every minute.
When the programme has finished a flashing zero
is displayed.
If you have selected the Rinse Hold option
, the
zero will not flash.
The selected drying time is displayed in minutes or
hours and minutes.
After starting the programme, the remaining time is
updated every minute.
The selected delay (24 hours max) set by means of
the relevant button appears on the display for 4
seconds, then the duration of the previously
selected programme is displayed.
Delayed start
1.25
Drying time
2.05
Duration/End of the selected
programme
The countdown is updated every hour.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed.
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph “Something not working”).
12 START/PAUSE button
This button has three functions:
Start - Pause - Draining of water.
E20
Alarm codes
Incorrect option selection
12
132992810gb.qxd 04/09/2003 09:41 Pagina 12