ENGLISH
9. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light
stops flashing.
Only the pilot light corresponding to the wash phase
which is running stays on.
The door light comes on to indicate that the door is
locked.
The machine starts operating.
10. At the end of the programme
The machine stops automatically.
If the Rinse Hold
option has been selected, the
light of the START/PAUSE button
flashes to
indicate that the water must be emptied out before
opening the door. A static zero appears on the
display.
At the end of the programme, a flashing zero is
displayed. The door locked light is off, the door can
be opened.
Release of the lock is also indicated by the coming
on of the light
.
Turn the programme selector dial to Reset
X
.
Switch the machine off by pressing the ON/OFF
button .
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
7. Select the required options
The light corresponding to the depressed button
illuminates.
8. Select the DELAY START option
To delay starting of a programme, press the DELAY
START button. The figures corresponding to the
selected delay will be displayed for about 3
seconds, after which the duration of the selected
programme will appear on the display.
When the START/PAUSE button
is pressed, the
selected delay will again appear on the display and
the machine starts its countdown.
If you want to load other laundry, you must first
PAUSE the machine by depressing the relevant
button. Open the door, load the laundry, close the
door and then depress START/PAUSE button
again.
19
132992810gb.qxd 04/09/2003 09:41 Pagina 19
