40
www.electrolux.co.th
14.2 Positioning
Use a spirit level on the top and side of
the Washer-Dryer to check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
Washer-Dryer is leveled.
It is important that your Washer-Dryer
stands firm and leveled on the floor to
ensure correct operation. The appliance
must not be installed behind a lockable
door, a sliding door or a door with a
hinge on the opposite side to avoid
restricting the Washer-Dryer door.
8.
9. Pull out the plastic spacers.
10. Put the plastic caps in the holes (X3).
You can find these caps in the user
manual bag.
Remove the three transit bolts.
A