Electrolux EWW1687SWD, User Manual

To have a good drying

performance do not exceed

the maximum drying loads

recommended in the user

manual. Do not set a spin

speed lower than the

automatic speed of the set

programme.

3. Put the detergent and the additives in

the appropriate compartment.

4. Turn the programme dial to the

washing programme.

The display shows the indicators of the

different washing phases.

5. Set the available options.

12.2 Washing & Automatic

drying

1. Press   again and again until the

display shows one of the dryness

level indicator:

•

: IRON DRY level indicator for

cotton items

•

: CUPBOARD DRY level

indicator for cotton, synthetic,

wool and silk items

•

: EXTRA DRY level indicator

for cotton items

The display shows the indicator  . The

time value on the display is the duration

of the w drying cycles,

calculated on a default load size.

To have a good drying the

appliance does not let you

set a too low spin speed for

the items to be washed and

dried.

2. Press 

 to start the programme.

In the display the indicator of the set

dryness level stays on.
The door locked indicator 

 goes on.

The display shows regularly a new time

value.

The last minutes of the

drying cycle the appliance

performs the anti-crease and

the cooling phases.

12.3 Washing & Timed Drying

To have a good drying the appliance

does not let you set a too low spin speed

for the items to be washed and dried.

1. Press   to set the drying time value.

The display shows 10 minutes.

The indicator   comes on in the display.

The display shows the set drying value
time. for example: 

. After some

seconds the display shows the final time
value 

, that is the total duration of

the washing and drying cycles (washing

+ anti- cooling phases).

If you set only 10 minutes of

drying after washing, the

appliance calculates also the

duration of the anti-crease

and the cooling phases.

2. Press 

 to start the programme.

In the display the indicator 

 comes

on. The door is locked. The display

shows regularly a new time value.

12.4 End of the programme

The appliance stops automatically. The

acoustic signals operate (if they are

active).

For more information see 'At the end of

the drying programme " of the previous

chapter.
1. Remove the laundry from the

appliance.

Make sure that the drum is empty.

2. Keep the door ajar, to prevent mildew

and odours.

3. Close the water tap.

12.5 Fluff in the fabrics

During the washing and/or drying phase,

some types of fabric, (sponge, wool,

sweatshirt) could release fluff.
The released fluff could stick to the

fabrics during the next cycle.
This inconvenient increases with

technical fabrics.
To prevent the fluff in your laundry, we

recommend that you:

www.electrolux.com

22