PART
PART NAME
QUANTITY
C
Window/Exhaust Adaptor B
1 pc
D
Window Sliding Kit
1 pc
E
Foam Seal
3 pc
F
Remote Control
1 pc
G
Battery (for remote control)
2 pc
H
Wall Adaptor (for permanent duct mounting)
1 pc
I
Wall Plug
4 pc
J
Screws
4 pc
INSTALLATION
EXHAUSTING HOT AIR
WINDOW DISCHARGE
In the COOLING mode (COOL) the appli-
ance must be placed close to a window so
that the warm exhaust air can be ducted
outside. First, place the unit on a flat floor
and make sure there’s a minimum of 30,5
cm clearance around the unit, and is within
the vicinity of a single circuit outlet power
source.
1. Take the hose out from back of the unit
2. Remove adaptor A from units by sliding
sideways.
3. Extend either side of the hose and
screw the hose to adaptor A.
electrolux
5
