background image

MAINTENANCE

WARNING
Disconnect from the mains electricity supply,
before attempting any maintenance or
adjustment.  Cutting head continues to rotate
after the trimmer has been switched off.
Keep fingers and hands clear of the line
cutter on leading edge of guard.

Caring for your Revolution

After you have finished using your Flymo Revolution
follow the procedure below:
1. Disconnect from the mains electricity supply.
2. Never clean your trimmer with water, cleaning

fluids, or solvents, just remove debris with a

suitable tool, a soft brush or dry cloth.

3. Using a soft brush, clean around the inside of

the safety guard, the cutting head 

(Fig S)

and

the motor housing air vents.

(Fig T)

4. Inspect the trimmer carefully, especially the parts

of the cutting head.

5. If your trimmer is damaged in any way contact

your local Electrolux Outdoor Products approved
service centre.  

Never use a damaged trimmer.

6. Wind cable carefully to avoid kinking.
7. Store in a cool, dry place and out of reach of

children.

ENVIRONMENTAL INFORMATION

Electrolux Outdoor Products are manufactured
under an Environmental Management System (ISO
14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the potential for recycling at
the end of the products’ life.

Packaging is recyclable and plastic components
have been labelled (where practical) for
categorised recycling.

Awareness of the environment must be
considered when disposing of ‘end-of-life’
product.

If necessary, contact your local authority for
disposal information.

SERVICE RECOMMENDATIONS

Your product is uniquely identified by a silver and black product rating label.

We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.

GUARANTEE AND GUARANTEE POLICY

If any part is found to be defective due to faulty
manufacture within the guarantee period, Electrolux
Outdoor Products, through its Authorised Service
Repairers will effect the repair or replacement to the
customer free of charge providing:
(a) The fault is reported directly to the Authorised

Repairer.

(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or

faulty adjustment by the user.

(d) The failure has not occurred through fair wear

and tear.

(e) The machine has not been serviced or repaired,

taken apart or tampered with by any person not
authorised by Electrolux Outdoor Products.

(f)  The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The product has not been used outside of the

country in which it was purchased.

(i) The machine has not been used commercially.
*

This guarantee is additional to, and in no way
diminishes the customers statutory rights.

Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual and
understand how to operate and maintain your
machine:

Failures not covered by guarantee

*

Replacing Nylon Line.

*

Failures as a result of not reporting an initial
fault.

*

Failures as a result of sudden impact.

*

Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator's
Manual.

*

Machines used for hire are not covered by this
guarantee.

*

The following items listed are considered as
wearing parts and their life is dependent on
regular maintenance and are, therefore not
normally subject to a valid warranty claim: Nylon
Line, Electric Mains cable.

*

Caution!

Electrolux Outdoor Products does not accept
liability under the warranty for defects caused in
whole or part, directly or indirectly by the fitting
of replacement parts or additional parts that are
not either manufactured or approved by
Electrolux Outdoor Products, or by the machine
having been modified in any way.

ENGLISH - 4

Summary of Contents for Flymo Revolution 2300









Reviews: