Electrolux Frigidaire CFEF3016TSA, Use & Care Manual

19

SETTING OVEN CONTROLS

Setting the Clock

When the appliance is first plugged in or when the power 
supply to the appliance has been interrupted, the display 
will flash 

12:00

. It is recommended to always set the clock 

for the correct time of day before using the appliance.

To set the clock:

1.

Press 

clock 

once (do not hold clock key down).

2.

Within 5 seconds, press and hold 

or 

 until 

the correct time of day appears in the display. 

Temperature display (Fahrenheit/Celsius)

The electronic oven control is set to operate in Fahrenheit 
(°F) at the factory. The oven may be programmed for any 
temperature from 170°F to 550°F (77°C to 288°C).

To change the temperature to Celsius (°C) or from °C to 
°F:

1. Press 

broil

. 

— — 

appears in the display.

2. Press and hold 

 until 

HI 

appears in the display.

3. Press and hold 

broil

 until 

°F

 or 

°C 

appears in the display.

4. Press 

 or 

 to change °F to °C or °C to °F. To 

accept the change, wait 6 seconds.

Changing between continuous bake setting or 12-
hour energy saving feature

The oven control has a built-in 12-hour energy saving 
feature that will shut off the oven if the oven is left on for 
more than 12 hours. The oven control can be programmed 
to override this feature for continuous baking.

To change the continuous bake setting:

1.

Press and hold 

timer on-off

 for 6 seconds until a tone 

sounds. 

— — hr

 will appear in the display for contin-

uous cooking. The current time of day will return to the 
display.

2.

To cancel the continuous bake setting, press 

timer on-

off

 and hold for 6 seconds until a tone sounds. 

12 hr

will appear in display indicating that the control has 
returned to the 12-hour energy saving feature.

Setting a silent control panel

When selecting a function, an audible tone is heard each 
time a key is pressed. If desired, the control can be 
programmed for silent operation. 

To set the controls for silent operation:

1.

Press and hold 

Start Time

 for 6 seconds. The control 

will beep once and release the key. 

2.

The controls are now set for silent operation.

To return to non-silent operation:

1.

Press and hold 

Start Time

 again for 6 seconds until the 

control beeps once and release the key.

2.

The control is now set for audible operation.

The clock cannot be changed when the oven is set for 
cooking or self clean is active.

NOTE

Changing to continuous bake or 12 hour mode does not 
change how the cooktop controls operate.

IMPORTANT