Electrolux Frigidaire CGEF3030PF, Use & Care Manual

16

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first plugged in or when the 

power supply to the appliance has been interrupted, the 

display will flash “12:00”. It is recommended to always 

set the clock for the correct time of day before using the 

appliance.

To set the clock:

1. Press 

once (do not hold pad down). 

2.  Within 5 seconds, press and hold the 

 or 

until 

the correct time of day appears in the display.

The clock cannot be changed during any timed bake or 

self-clean cycle.

NOTE

* The 

OVEN

 indicator light on the electronic display 

will turn ON and OFF when using the Bake feature 

and during preheat. This is normal and indicates that 

the oven is cycling to maintain the selected baking 

temperature. When the preheat indicator light turns OFF, 

your oven is ready.

Changing temperature display (°F or °C)

The electronic oven control is set to display in °F 

(Fahrenheit) when shipped from the factory. The oven can 

be programmed for any temperature from 170°F to 550°F 

(77°C to 287°C).

To change the temperature to display °C (Celsius) 

or from °C to °F (control should not be set for Bake 

or Self-clean when setting this feature):

1. Press 

 . “— —” appears in the display.

2.  Press and hold the 

 until “HI” appears in the 

display.

3.  Press and hold 

until °F or °C appears in the 

display.

4.  Press the

 or

 to change °F to °C or °C to °F.

5.  Press any control pad to return to normal operating 

mode.

Setting a silent control panel

When choosing a function, a beep will be heard each time a 

pad is pressed. If desired, the control can be programmed 

for silent operation. Press and hold 

. After 7 seconds, 

the control will beep once. This will block the controls from 

sounding when a pad is pressed. To return the sound, press 

and hold

again for 7 seconds until the control beeps 

once.

NOTE

Changing between continuous bake setting 

or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving 

feature that will shut off the oven if the control is left on 

for more than 11 hours and 59 minutes. The oven can 

be programmed to override this feature for continuous 

baking.

Changing to continuous bake setting:

1.  Press and hold 

 down for 5 seconds until tone is 

heard, “ 

— —  hr

” will appear in display for continuous 

cooking. The current time of day will return to the 

display.

2.  To cancel the continuous bake setting, press  

and hold for 5 seconds until tone is heard. “

12hr

” 

will appear in display indicating that the control has 

returned to the 12-Hour Energy Saving feature.