• The indicators
, ,
and
go off.
• The indicator continues to flash.
• The display shows a number and
the letter C. Each number refers to
a different colour.
–
= TimeBeam deactivated.
3.
Press again and again to change
the colour.
• You can see the different colours
on the kitchen floor.
4.
Press the on/off button to confirm the
setting.
7.
OPTIONS
Desired options must be
activated every time before
you start a programme
(except for Multitab).
It is not possible to activate or
deactivate options while a
programme is running.
7.1
Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
This option also deactivates the release of
rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
released even with the option Multitab
activated.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
You do not need to activate the option
Multitab every time you start a
programme. Once you have activated the
option it will remain active.
How to activate Multitab
Press .
The related indicator comes on.
7.2
TimeSaver
This option increases the pressure and the
temperature of the water. The washing
and the drying phases are shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
Press
, the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
8.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2.
Fill the salt container.
3.
Fill the rinse aid dispenser.
4.
Open the water tap.
5.
Start a programme to remove any
processing residuals that can still be
www.electrolux.com
12
