3.
OPERATION
3.1
Switching on
B
C
A
A
Temperature Regulator
B
Half Loaded position
C
Full Loaded position
Insert the plug into the wall socket.
Turn the Temperature Regulator to the
Full Loaded position and let the appliance
run for 24 hours to allow the correct tem-
perature to be reached before placing
food inside.
Adjust the Temperature Regulator ac-
cording to the quantity of the stored
foods.
3.2
Switching off
To turn off the appliance, turn the Tem-
perature Regulator to the “OFF” position.
3.3
Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature Regulator toward
lower settings to obtain the minimum
coldness.
• turn the Temperature Regulator toward
higher settings to obtain the maximum
coldness.
In case of freezing less food vol-
umes, the Half Loaded setting is
the most suitable.
In case of freezing much food vol-
umes, the Full Loaded setting is
the most suitable.
4.
CONTROL PANEL
2
1
3
1
Temperature regulator
2
Pilot light
3
High temperature alarm light
4.1
High temperature alarm
An increase in the temperature in the
freezer (for example due to an power fail-
ure) is indicated by switching on of the
Alarm light
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
ENGLISH
51