Electrolux Blast Chillers
Blast Chillers - 56 kg
Internet: http://www.electrolux.com/foodservice
HDAA030
2011-05-10
Subject to change without notice
TROLLEY FOR 20X1/1 ROLL-IN RACK
922132
RILSAN COATED GRID
881061
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
881010
RACK RAILS FOR VERTICAL BLAST CHILLER
881182
PRINTER FOR HACCP BASIC VERSION
881532
PLASTIC COATED GRID-600X400 MM
880864
PAIR OF 1/1 GN AISI 304 S/S GRIDS
921101
KIT HACCP EKIS
922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW
880183
80MM PITCH ROLL-IN RACK 14X1/1GN
922205
60-MM PITCH ROLL-IN RACK FOR 20X1/1
922203
3-POINT-SENSOR PROBE-BL.C/FREEZERS LW
880212
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW
880213
ACCESSORIES
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
4
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW
1
INCLUDED ACCESSORIES
Net weight - kg.
231
installed-electric
2.558
Power - kW
at evaporation temperature - °C
-5
Refrigerant power
Refrigeration power - W
5363
Refrigerant quantity - g.
4000
Refrigerant type
R404a
Compressor power - HP
2.5
Max load capacity - trays h 65 mm - n°
12
Trays type
GN 1/1; 600x400
Door hinges
Right Side
N° and type of door
1
height
2230
depth/with open doors
835, 1570
width
800
External dimensions - mm
Cooling unit
Built-In
Gross capacity (D.I.N. 8952) - l.
560
UK Guide lines - chilling / freezing
56
NF Regulations - chilling / freezing
43.2
Productivity per cycle - kg.
Type
D - 56 KG CHILLER
TECHNICAL DATA
RBC201
726624
CONSTRUCTION
•
Internal and external finishing in 304
AISI stainless steel and backpanel in
galvanized steel.
•
High density polyurethane
insulation, 60 mm tickness, HCFC
free.
•
Environmentally friendly: R404a as
refrigerant fluid.
•
Developed and produced in ISO
9001 and ISO 14001 certified factory.
•
Inner cell with fully rounded corners.
•
Door equipped with removable
magnetic gasket with hygienic design.
•
Motors and fan waterproof
protected IP21.
•
Evaporator with antirust protection.
•
Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
•
Automatic heated door frame.
•
Thermostatic expansion valve to
optimize the cooling unit efficiency.
•
Adjustable feet 150 mm high.
•
Stand alone printer as accessory.
•
PC connection on request, gate RS
485.
INSTALLATION
•
No water connections required.
•
Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.
*NF HYGIENE ALIMENTAIRE
certifying authority : AFAQ AFNOR
CERTIFICATION. Adress:11, Avenue
Francis de Pressense - 93571
Saint-Denis La Plaine Cedex - France.
Conformity with regulation NF031.
Certified guarantees: fitness for
cleaning, thermal performance.
