Step 2
Lift and pull the latches until they click.
Step 3
Close the oven door halfway to the first
opening position. Then lift and pull to remove
the door from its seat.
Step 4
Put the door on a soft cloth on a stable sur‐
face.
Step 5
Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to re‐
lease the clip seal.
1
2
B
Step 6
Pull the door trim to the front to remove it.
Step 7
Hold the door glass panel by its top edge
and carefully pull it out. Make sure the glass
slides out of the supports completely.
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass
panels in the dishwasher.
Step 9
After cleaning, install the glass panel and the oven door.
If the door is installed correctly, you will hear a click when closing the latches.
The screen-printing zone must face the inner side of
the door. Make sure that after the installation the sur‐
face of the glass panel frame on the screen-printing
zones is not rough when you touch it.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
A
ENGLISH
19
Summary of Contents for KOIGH00KA2
Page 1: ...KOIGH00KA2 User Manual Oven EN electrolux com register ...
Page 22: ...22 ...
Page 23: ...23 ...