1. Remove the grease filters from the
appliance.
Refer to "Cleaning the grease filter" in
this chapter.
2. Turn the filter counterclockwise (1)
and then pull (2).
1
2
To mount the filters back follow the steps
in reverse order.
In any case, it is necessary to replace
the filters at least every four months.
4.4 Replacing the lamp
WARNING!
Risk of burns and electric
shock! Disconnect the
appliance from the electricity
before the operation! Make
sure that the light bulb has
cooled down before touching
it.
WARNING!
Risk of injury! Use protective
gloves to replace the lamp.
Risk of damage to the
appliance! Do not use sharp
edged tools!
Replace the burnt light bulb in
accordance with the specifications:
Power (W)
4
Socket
E14
Voltage (V)
220 - 240
Dimensions (mm)
37 x 100 (diameter
x length)
ILCOS D Code
(according IEC
61231)
DRBB/
F-4-220-240-
E14-37/100
To replace the lamp:
1. The lamp cover has two slots on
each side (1). Use a flat non sharp
plastic tool. Gently remove the lamp
cover from the appliance (2).
2. Replace the lamp.
3. Mount the lamp cover.
5. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
ENGLISH
5
