5
painted appliances on the outside,
use a cloth dipped in lukewarm wa-
ter and neutral detergent. To clean
steel, copper or brass appliances
on the outside, it is always best to
use speci
fi
c products, following the
instructions on the products them-
selves. To clean the inside of the
appliance, use a cloth (or brush)
dipped in denatured ethyl alcohol.
Clean grease
fi
lters in relation to use, at least
every 2 months to prevent the risk of
fi
re.
Hand wash or clean in a dishwasher using a
neutral detergent. If washing in the dishwa-
sher, possible discoloration of the
fi
lters does
not in any way compromise their functioning.
The activated charcoal
fi
lter is not washable
and cannot be regenerated, and must be
replaced approximately every 4 months of
operation, or more frequently for particularly
heavy usage.
4. CONTROLS
Models LFG525S, LFG525W, LFG525K:
Switch A: LIGHT; position 0: light off; position
1: light on.
Switch B: MOTOR SPEED: makes it possible
to select the motor operating speed; position
0: motor off.
C: Motor on light.
Models LFG517X, LFG615X, LFG615W:
Button P1:
fi
rst speed motor ON/OFF switch.
Button P2 (Models LFG615X, LFG615W):
Change motor speed (1-2-3-P-1-2-3-P….).
At fourth speed the letter on display “P” is on
(Booster). The 4th speed remain active for 5
minuts then going back in 3th.
Button P2 (Model LFG517X): Change motor
speed (1-2-3-4-1-2-3-4….).
Button P3: Timer. Activate and deactivate
timer (5 minuts). If the timer is active, the
number correspondent at the speed
fl
ashing.
Button P4: Lights. Turns the lights on/off.
Button P1 + P4 : Filter Alarm Reset. When
display shown an “F” letter
fl
ashing, the
grease
fi
lters must be cleaned (40 hours of
operation). When display shown an “C” letter
fl
ashing, the charcoal
fi
lters must be repla-
ced (160 hours of operation) and the grease
fi
lters must be cleaned.
Obviously, if the hood is not a
fi
ltering model
and does not have a charcoal
fi
lters, clean
the grease
fi
lters both when display shown
“F” and when display shown “C”. The
fi
lter
alarm can be seen when the motor is off and
for about 30 seconds. To RESET the hour
counter, keep simultaneously the buttons
P1 and P4 pressed for 2 seconds while the
alarm can be seen.
5. LIGHTING
If the light spot is damaged, it must be re-
placed only by the manufacturer, its service
agent or similarly quali
fi
ed persons in order
to avoid a hazard.
ENGLISH
Summary of Contents for LFG517X
