84
5. Maintenance
Hob maintenance
Caution! Before any cleaning or maintenance, make sure
the cooking zones are switched off and the heat indicator
has turned off.
5.1 Cleaning
The hob must be cleaned after each use.
Important:
Do not use abrasive sponges, scouring pads. Their use, over
time, may ruin the glass.
Do not use chemical irritants, such as oven sprays or stain
removers.
After each use, leave the hob to cool and clean it to remove
deposits and stains caused by food residue.
Sugar or food with a high sugar content damages the hob and
must be immediately removed.
Salt, sugar and sand may scratch the glass surface.
Use a soft cloth, paper towel or specific products to clean the
hob (follow the Manufacturer's instructions).
DO NOT USE STEAM JET CLEANERS!!!
Important:
If liquids accidentally or excessively leak out of the pots, the
drain valve located on the lower part of the product can be
opened so as to remove any residue and be able to clean in
conditions of maximum hygiene.
Fig. 24
Cleaning the metal grille:
To clean the metal grille, it is recommended to wash it by
hand using only water and neutral soap.
Fig. 23
Extractor fan maintenance
Cleaning
For cleaning, use
ONLY
a cloth moistened with neutral liquid
detergents.
DO NOT USE CLEANING UTENSILS OR
TOOLS!
Avoid the use of products containing abrasives.
DO NOT USE ALCOHOL!
Grease filter
Traps grease particles generated by cooking.
Must be cleaned once per month (or when the filter saturation
indication system indicates this need), with non-aggressive
detergents, either manually or in the dishwasher at a low
temperature and in a short cycle.
When cleaned in the dishwasher, the metal grease filter may
discolour, but its filtering characteristics remain unchanged.
Fig. 21.2 - 22.5
Activated Carbon Filter - Ceramic
(Only for Filtration Version)
Traps unpleasant odours generated by cooking.
Fig. 22.3
The product comes with a set of odour filters. The saturation
of the odour filters can occur after somewhat prolonged use
depending on the type of cooking and how regularly the
grease filter is cleaned. The odour filters can be thermally
regenerated every 2/3 months in an oven pre-heated to 200°C
for 45 minutes. The correct regeneration of the filter ensures
that it can constantly filter efficiently for 5 years.
Warning!
Do not leave filters on the bottom of the oven, but
place it on a baking tray and position it at a mid height..
Summary of Contents for LIC744I
