4.3 Temperature regulation
Recommended set temperature is:
• -18°C for the freezer.
The temperature range may vary
between -16°C and -24°C .
To set the temperature of the appliance,
press the temperature regulation button
repeatedly until you reach the desired
temperature of the compartment.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
4.4 Super Freeze function
The Super Freeze function is used to
perform pre-freezing and fast freezing in
sequence of freezer compartment. It
accelerates the freezing of fresh food
and, at the same time, protects
foodstuffs already stored from
undesirable warming.
To freeze fresh food activate
the Super Freeze function at
least 24 hours before placing
the food to complete pre-
freezing.
To activate this function, press
repeatedly the temperature regulation
button until the Super Freeze indicator
appears.
This function stops automatically after 54
hours.
You can deactivate the Super Freeze
function before its automatic end by
repeating the procedure until the Super
Freeze indicator turns off or by selecting
a different temperature of the freezer
compartment.
4.5 Door open alarm
If the freezer door is left open for
approximately 2 minutes, the sound is on
and the alarm indicator flashes.
The alarm stops after closing the door.
4.6 Alarm
In case of cooling issues, power
interruptions or significant temperature
changes inside your appliance, the alarm
indicator lights up red and the sound is
on.
The alarm may light when
you plug the appliance for
the first time.
Refer to the "Troubleshooting" chapter
for more possible causes of triggering
the alarm, and solutions on how to
deactivate it.
4.7 Standby mode
Activate the Standby mode to switch off
the freezing function and therefore lower
the energy consumption of the appliance.
To activate the Standby mode:
1. Set the temperature for -16°C. Refer
to the "Temperature regulation"
section.
2. Press and hold the temperature
regulation button until all temperature
indicators blink 3 times.
If you press the temperature
regulation button while the
Standby mode is on, all
temperature indicators blink
3 times.
You can deactivate the Standby mode by
repeating the above procedure.
www.electrolux.com
10
