background image

2. Turn on the power supply and indicate the red light to turn on and preheat. After 30 
seconds of preheating, the clothes can be ironed.
3. Description of hanging ironing clothes: (1) Hang clothes up, straighten the ironing area 
with one hand, and hold the machine with the other. (2) Turn on the steam switch, press the 
steam hole close to the clothes, and move the ironing from top to bottom.
4. Flat ironing instructions: (1) Place the clothes on the ironing board, one hand on the left 
side of the clothes, the other hand on the machine. (2) Turn on the steam switch and press 
the steam panel close to the clothes, moving from left to right.
5. Disassembling and assembly brush instructions: when there is hair or dust on clothing, 
the installation of brush can be a good dust removal, hair removal. When disassembling 
and assembling the brush, it is necessary to turn off the steam switch and cut off the power 
supply. (1) Remove the brush and pinch the stick point on the brush with your finger and 
take it out. (2) Install the brush and press the stick point of the brush into the steam nozzle 
with your finger.

Water

After each use

1. Pour out the residual water inside the water tank, turn on the steam switch, and spray the 
water vapor inside the machine.
2. Turn off the steam switch and pull the power cord out of the outlet.
3. Place the machine on a flat desktop and wait for the product to be properly accepted 
after cooling

Nursing, cleaning and storage

(1) Do not use rough or corrosive detergents or solvents. (2) Please do not immerse the 
steam scalding machine in water or other liquids. (3) Don't drop, throw it or try to bend it. 
(4) Please do not attempt to disassemble the decomposition products. (5) Empty the water 
tank after each use. (6) Avoid storing products in damp places. (7) Do not close to the 
heat source or let the sun shine directly on the product. (8) Always ensure that the steam 
outlet hole is clean, scale-free and not blocked. (9) It is recommended to store the ironing 
machine in a flat position, such as in a drawer.

Summary of Contents for LX900T









Reviews: