7
• If necessary both the HEPA filter and
grey protection filter can be washed
under a tap with cold water. Always
wash the filter from the underside, do
not scrub of use cleaning agents on
the filter. Do not use a washing
machine to wash the filter.
• Air dry both the filters for 24 hours to
ensure it is completely dry before
reusing. Avoid direct sunlight or
extreme drying conditions. Do not
use hair dryer to dry the filters.
• Refit the grey protection filter by
aligning it with the dust container
and sitting it in place, then fit the
filter in frame by aligning the frame
with the dust container and simply
sliding it into place.
• When fitted correctly a safety device
will allow the dust container to fit
back into the dust container only if
the filter is properly installed. If dust
container do not fit into the dust
compartment do not force it and
check if filter is properly installed.
• If either of the filters appear damaged
do not re use them.
CHANGING THE EXHAUST FILTER
• Open the filter grill. Remove the
exhaust filter. Rinse it under tap
water and dry it completely. Put the
filter back into the cleaner. Close the
filter
grill.