9
TROUBLESHOOTING
You can perform your own troubleshooting at home based on the checklist given below.
However, if the problem persists, please consult your nearest authorized Electrolux
Service Centre.
PROBLEM
POSSIBLE CAUSES
CORRECTIONS
The vacuum cleaner
The plug is not properly
Check the plug connection
does not start.
connected to the socket.
or try another socket.
Thermal protector
Press the ON/OFF button
activated due to
and wait 20 - 30 minutes for
the motor to cool off.
high temperature.
Filter indicator lights
Dust container is full.
Empty the dust container.
and stays on.
The filters are clogged.
Clean or replace filters.
Reduction of
Suction hose is blocked.
Clean the hose.
suction
capacity.
Nozzle is blocked.
Clean the nozzle.
Dust container is full.
Empty/replace the dust
container.
Filters are clogged.
Clean or replace filters.
Hose is damaged
Change the hose.
or
broken.
Over heating.
Dust container is full.
Empty/replace the dust
container.
Filters are clogged.
Clean/replace filters.
To locate your nearest Electrolux Service Centre, please contact your country’s Electrolux
Customer Care found on the last page of this booklet.