7
6
9
8
5
4
2
1
3
6
6
7
8
9
5
1
2
4
3
English
BEFORE STARTING
1
Check that the s-bag™ is in place.
2
Insert the hose until the catch clicks to engage (press the
catch to release the hose).
3
Attach the telescopic tube or Easy Reach® system telescop-
ic tube (certain models only) to the hose handle and the floor
nozzle (to disconnect, press the lock button and pull apart).
4
The hose can easily be removed from the handle by pressing
the retaining button and pulling out the hose.
5
Pull out the cable and plug it in. Press the foot pedal to
rewind the cable (take hold of the plug to prevent it striking
you).
6
Some vacuum cleaners, depending on the model, are fitted
with an automatic cable winder (Autoreverse). Pull out the
cable and plug it in. Move the control forwards to roll the
cable in and out as required. Move it backwards to lock the
cable in position once it has been rolled out.
7
Press the On/Off button with the foot to start the vacuum
cleaner.
8
Adjust suction power using the suction control on the vacu-
um cleaner or the suction control on the hose handle.
9
If you have a vacuum cleaner with remote control, press
the +/- buttons to adjust suction control (be sure batteries
have been inserted beforehand). You can also start/stop the
cleaner by pressing the centre of the control (as long as the
main cleaner switch is set to on).
8
Insert the hose into the hose handle until the catches click to
engage (press the catches to release the hose).
English
8228395-04.indd 8
11/15/06 2:43:41 PM
