background image

OPERATING INSTRUCTIONS

ON AND OFF

Touch 

 for 1 second to start or stop the

appliance.

AUTOMATIC SWITCH OFF

The function stops the hob
automatically if:

• all cooking zones are off.
• you do not set the heat setting after you

start the hob.

• you cover a sensor field with an object (a

pan, a cloth, etc.) for longer than 10 sec-

onds. The sound operates until you re-
move the object.

• the hob gets too hot (e.g. when a sauce-

pan boils dry). Before you use the hob
again, the cooking zone must be cool.

• you use incorrect cookware.   comes

on and after 2 minutes the cooking zone
stops automatically.

• you do not stop a cooking zone or

change the heat setting. After some time

 comes on and the hob stops. See the

table.

Automatic Switch Off times

Heat setting

 

 - 

 - 

 - 

 - 

Stops after

6 hours

5 hours

4 hours

1.5 hours

THE HEAT SETTING

Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.

SWITCHING THE POWER FUNCTION
ON AND OFF

The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 5 mi-
nutes at most. After that the induction
cooking zone automatically switches back
to heat setting 14. To switch on, touch 

 ,

 comes on. To switch off, touch a heat

setting 

 - 

 .

TIMER

You can select the timer function with 

 .

The Count Down Timer

Use the Count Down Timer to set how long
the cooking zone operates for only this one
time. It deaktivates the cooking zone auto-
matically after the time you set.

P

The selection of Count Down Timer
function is possible when the cooking
zone is activated and the heat setting is
set.

When this function is activated, 
comes on.

To activate of the Count Down Timer:

touch 

 of the timer to set the time ( 

00

99

 minutes). When the indicator of the

cooking zone starts to flash slow, the
time counts down.

To see the remaining time: 

touch 

again and again, until   comes on. The
display shows the remaining time.

To change the Count Down Tim-
er:

touch 

 again and again, until 

comes on and then touch 

 or 

 .

To deactivate the Count Down Timer:

touch 

 again and again, until   comes

on and then touch 

 . The remaining

time counts back to 

00

 .

When the timer countdown comes to an
end, the sound operates and 

00

 flashes.

The cooking zone deactivates.

To deactivate the sound: 

touch 

The Count Up Timer

Use the Count Up Timer to monitor how
long the cooking zone operates.
• When this function is activated, 

comes on.

To activate the Count Up Timer:

electrolux

Summary of Contents for Profiline WOK38TSIO

















Reviews: