4. Lift the top cover and place it on a
soft surface.
5. Unscrew the 4 screws that connect
the upper hinge. Put the upper hinge
in a safe place together with the
screws.
6. Lift the door and put it on a soft
surface.
7. Tilt the appliance carefully on a soft
foam packaging or similar material to
avoid any damage to the back of the
appliance and the floor.
8. Unscrew the screws of the bottom
hinge and adjustable feet.
9. Install the pin in the opposite hole of
the hinge.
10. Screw the bottom hinge on the other
side of the appliance.
11. Install the rubber support on the side
with no hinge.
12. Fit the door on the lower hinge
making sure the hinge pin enters the
door bottom hole.
13. Install the upper hinge on the
opposite side of the appliance. Fit the
upper hinge pin into the door upper
hole. Tighten the screws.
14. Screw the remaining 2 screws on the
top side of the appliance with no
hinge.
15. Place the top cover on the appliance
and tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting
the appliance to the power supply.
3.6 Installation of a door handle
If there is a door handle separately
provided in a bag, you can install it as
follows:
1. Remove the screws from the holes
on the side of the door. Keep or
ENGLISH
61
