THE DRY PLUS ()
FUNCTION
This function helps to get the laundry more
dried. There are 3 possible selections:
minimum - the default selection which is re-
lated to the programme.
moderate — the selection to get the more
dried laundry.
maximum — the selection to get the much
more dried laundry.
THE ANTICREASE (KNITTERSCHUTZ)
FUNCTION
Extends of 30, 60, 90 or 120 minutes the
standard anticrease phase (30 minutes) at
the end of the drying cycle. This function
prevents the laundry from creases. The
laundry can be removed during the anti-
crease phase.
THE SPUN AT RPM (U/MIN.)
FUNCTION
This function helps to set the best condition
to dry the laundry. If you know the initial
spin speed when you washed you can use
this function. Higher spin speed causes that
the laundry contains less water.
THE BUZZER (SIGNAL) FUNCTION
When the buzzer function is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always on.
You can use this function to activate or de-
activate the sound.
THE TIME DRYING (ZEITWAHL)
FUNCTION
Operates only with the Time programme.
Lets the user to set special time of drying
programme from minimum 10 min. to maxi-
mum of 2 hours (in 10 min. steps).
THE DELAY START (ZEITVORWAHL)
FUNCTION
Let to delay the start of a drying pro-
gramme from minimum of 30 minutes
to maximum of 20 hours.
1. Set the drying programme and func-
tions.
2. Push the Delay Start (Zeitvorwahl) but-
ton again and again until the necessary
time of the delay come into the view on
the display (e.g. if the programme
has to start after 12 hours.)
3. To activate the Delay Start (Zeitvorwahl)
function, push the Start/Pause button.
The time to start decreases on the dis-
play.
CHILD LOCK FUNCTION
The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push buttons
and the programme dial (this function does
not lock Auto/Off button). To activate the
child lock function push the Dry Plus
() and Anticrease (Knitterschutz)
buttons at the same time until the symbol
come into view on the display. To deac-
tivate push again the above buttons until
the symbol go out of view.
You can activate the child lock function:
• before you push the Start/Pause button -
the appliance cannot start
• after you push the Start/Pause button -
all the push buttons and the programme
dial are deactivated
STARTING A PROGRAMME
To activate the programme push the button
as on the illustration. The LED above the
button illuminates in red colour.
CHANGE A PROGRAMME
To change a programme, push the
On/
Off
button to deactivate appliance. Push
the
On/Off
to activate the appliance and
then set the programme again.
AT THE END OF PROGRAMME
When the drying cycle is completed, the
symbol flashes on the display. If the Buzzer
electrolux
35
