Cleaning the lint filter
The lint filter must be cleaned after each load.
1. Grasp the filter handle and pull it towards you.
2. Open the filter and remove the lint from all
sides of it by hand. Use a soft dry cloth and, if
necessary, a sponge with a small amount of
washing-up liquid to remove any deposits. Dry
the filter carefully with a towel.
3. Close the filter before closing the door.
Emptying the condensed water
container
If you have not connected the machine to a
separate drain the condensed water container
must be emptied after each load. Remove the
condensed water container, empty out the water
and replace the container.
If the condensed water container becomes full to
overflowing, the programme is interrupted and
"Over Flow" appears on the display. Empty the
container and press the Start button to restart the
programme.
For connection to a separate drain, see the
installation instructions in the set of documents.
15
Care and cleaning
