Cleaning the steamer filter
Lint should be cleaned from the net filter and the
foam filter inside the steamer door at the intervals
shown on the machine's display or more often.
1. Remove the plinth
2. Open the steamer door.
3. Pull out the filter by grasping the "handle" in
the middle.
4. Brush the lint from the filter with your hand. Use
a soft, dry cloth to remove any deposits.
5. Remove the foam filter found behind the net
filter.
6. Wash the foam filter in a washing machine
using a rinse or quick wash programme. No
detergent or hot wash is necessary. The lint is
washed away and the filter is not damaged.
7. Clean the steamer by spraying water on the
ribs with a plant spray bottle. The lint runs off
together with the water, which is then
evacuated by the condensed water pump.
8. Replace both filters and close the steamer
door.
NOTE!
Avoid touching the ribs on the steamer. They are
very thin and easily damaged. If the ribs are bent
or damaged, the efficiency of the condenser is
greatly impaired, as is the drying result.
Cleaning the outside of the machine
Clean the outside of the machine and the
programme panel with a mild cleaner. Do not use
solvents, as these can damage the machine. Do
not hose down or spray the machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble dryer
16
Care and cleaning