19
6562
1
2
6281
2 (alt.)
3
4
6271
2 (alt.)
Heating
Electric heating heats the washing water with
three elements accessible from the front of the
machine.
The machine’s heating system is described more
thoroughly in the section
Heating.
Water connections
The machine can have one, two, three or four wa-
ter inlet valves depending on the machine size and
customer requirements.
In this unit there are also eight connections for an
external detergent feeder.
Rear electric module
Contains the main switch or terminal block for
incoming power, heating contactor, I/O board with
outputs for controlling the machine’s water and
drain valves and heating. Some machines have an
additional I/O board with terminal blocks for con-
necting e.g. external detergent feeder.
9
9
10
1. Water connections
2. Heating element
1. Rear electric module
2. Power supply connection
3. Distribution board, I/O board 2
4. Contactor K21 (Heat)
9
10
Machine presentation
