Electrolux Washer, Use And Care Manual

10

Operating Instructions

6.  Select the appropriate cycle and 

settings for the load.

•  Turn the cycle selector knob in either direc-

tion to select the cycle desired. The indica-
tor for that cycle will be illuminated. See the 
“Cycle Selection” section in this guide for 
descriptions of each cycle.

•  The estimated cycle time, suitable wash 

and rinse water temperatures, fi nal spin 
speed, soil level, and options for each cycle 
will be indicated for the cycle selected. See 
the “Cycle Settings” and “Washer Settings 
Chart” in this guide for descriptions and 
available settings for each cycle.

•  To change the settings, press the 

Tempera-

ture

, 

Spin Speed

, 

Soil

, and 

Options

 but-

tons to scroll to the desired settings.

•  To select or delete an 

option

, press the button 

for that 

option

. The indicator will light when 

the 

option

 has been selected. It will no longer 

be lighted when the 

option

 has been deleted.

•  To add a forgotten item to the washer any 

time during the wash portion of the cycle, 
press 

pause

. When the door unlocks, open 

the door, add the item, close the door and 
press 

start

 to resume the cycle.

•  If changes to the settings or options are at-

tempted after the cycle starts, you will hear 
several beeps when the buttons are pressed. 
To change the settings or options, press 

pause

, make the new selections and press 

start

 again.

•  To change the cycle once the cycle has 

begun, press 

cancel

, select a new cycle, 

and press 

start

 again. Just turning the cycle 

selector knob will not change the cycle.

•  To stop the cycle, press 

cancel

.

       NOTE

To provide the best care for your laundry, not 
every setting or option is available with every 
cycle. If a setting or option is not available for the 
cycle selected, the indicator will not light.

       NOTE

If the cycle is interrupted during spin, the door 
lock will not release until the tub has stopped 
spinning. DO NOT force open the door.

•  Adjustments to a cycle will be remembered 

and recalled each time that cycle is selected 
in the future.

•  A signal will sound at the end of the cycle if 

the 

chime

 option has been selected.

•  Remove items from the washer when the 

cycle ends and place in dryer, line dry or dry 
fl at as directed on the fabric care label.

Follow the fabric care label instructions 
on items to be washed.

For best results

OPERATING YOUR WASHER, continued

       CAUTION

ENTRAPMENT and TIP-OVER HAZARD

An open door could entice children to hang on 
the door or crawl inside the washer. If there are 
no small children present, you may leave the 
door ajar to prevent mildew and odor build up.

•  Excess wrinkling, color transfer or odors may 

develop in items left in the washer after the 
cycle has ended, if not removed promptly.

To return to factory settings, 
press these two buttons at the 
same time and hold until the 
signal sounds.

7.  Start the washer.

•  Close the door and press 

start

. The washer 

will not operate with the door open and 

DOOR OPEN

 will be displayed.

• Select 

delay start

 to delay the beginning of 

the cycle if desired.

•  As a safety measure, the door will automati-

cally lock during the entire wash cycle.