User manual
21
5 Timer
The timer is used to start a part of the program (for example the last rinse of the udder cloth program) after pause on
a pre-set time. The time can be set for all days or for selected days.
To program the timer you need to activate the machines service mode.
The service mode is activated by a long press on the control knob.
SERVICE MENU
FUNCTION TEST
CONFIGURATION
PRICE PROGRAMMING
STATISTICS
PROGRAM PARAMETERS
SYSTEM
The following menus are activated by a short press on the control knob.
Activate the
PROGRAM PARAMETERS
menu.
SERVICE MENU
FUNCTION TEST
CONFIGURATION
PRICE PROGRAMMING
STATISTICS
PROGRAM PARAMETERS
SYSTEM
Activate the
SET START AFTER PAUSE
menu.
Activate the
ADD NEW OCCASION
menu.
The display will now show the following submenus:
•
BACK
•
TIME
•
ENABLED
•
ALL DAYS
•
MONDAY
•
TUESDAY
•
WEDNESDAY
•
THURSDAY
•
FRIDAY
•
SATURDAY
•
SUNDAY
•
REMOVE OCCASION
Activate the
TIME
menu to program the time. Set the time by turning the control knob and save when ready.
Select from the list and activate the day/days one by one by pressing the control knob. A filled square indicates that
the day is activated.
Press
BACK
to exit and save the changes by selecting
YES
.
Example:
The program is started the day before and will pause before the last rinse.
If the time is set to 04.00 and
ALL DAYS
is activated, this means that the last rinse on the program will be started at
04.00 all days of the week.
When saved, the programmed time — occasion, will be listed in the
SET START AFTER PAUSE
menu as a new row.
It is possible to program several times — occasions on the same day.
Up to 10 occasions can be saved in the list.
Press
ENABLED
to activate or deactivate the selected occasion.
Press
REMOVE OCCASION
to delete the selected occasion.
