background image

8

     PROCEDURE :

     Change the bulb with 240V, 15W characteristic. 
     Replace lamp and turn it clockwise.

     Take the lamp off by turning it counter-clockwise. 

     Disconnect the plug of the refrigerator from the outlet. 

    Caution: To prevent any breakage do not over tighten the lamp to socket.

    It is highly recommended to have the service agent or qualified 

    person to do the lamp replacement.

               If the illuminating does not work properly. In case of the replacement bulb is 

     needed, it had better be replaced by its service agent or similarly qualified person 

     in order to avoid hazard.

C

L

E

A

N

I

N

G

  A

N

D

  M

A

I

N

T

E

N

A

N

C

E

Removable parts may be rinsed with water.
Don’t forget to clean the door gasket especially the bottom gasket is liable 

to dirty.
Wipe the door with a dry cloth when water splasher or it rusts.

Occasionally remove dust and other particles which may collect at the back of

the refrigerator and the condenser under the cabinet to keep heat radiating

efficiency high. For safety, unplug the refrigerator before cleaning.

Your refrigerator does not require any special maintenance. To clean the inside,

use a soft cloth with water, mild soap suds, or some mild detergent. 

Wash ice cube tray, evaporation tray and shelves in a mild detergent solution

and dry with a soft towel. Stains on the outside can also be removed with a soft

cloth and some mild detergent.

L

A

M

P

  R

E

P

L

A

C

E

M

E

N

T

Summary of Contents for WRM2000_A-R












Reviews: