Electrolux ZGNN752X, User Manual

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The use

of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

This appliance is suitable for the following markets:

GB

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

WARNING! Risk of injury or damage

to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Seal the cut surfaces with a sealant to prevent

moisture to cause swelling.

• Protect the bottom of the appliance from steam

and moisture.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot cookware

falling from the appliance when the door or the

window is opened.

• If the appliance is installed above drawers make

sure that the space, between the bottom of the

appliance and the upper drawer, is sufficient for

air circulation.

• The underside of the appliance can get hot

when in use. If an oven has not been fitted

underneath the hob and underside of the

appliance is accessible and could allow a user

or items stored beneath the hob to come in

direct contact with the underside of the hob, an

intermediate protection panel must be fitted.

• Plywood or kitchen carcass material is

acceptable for the panel.

• The panel must be removable for servicing.

Screws used to fix the panel must be accessible

after installation.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Make sure the appliance is installed correctly.

Loose and incorrect electricity mains cable or

plug (if applicable) can make the terminal

become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance or

hot cookware, when you connect the appliance

to the near sockets.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug (if applicable) or to the mains cable.

Contact our Authorised Service Centre or an

electrician to change a damaged mains cable.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance

4