STORAGE AND
WAREHOUSING CONDITIONS
•
The device should be transported and stored within
a temperature range of -10°C to 60°C, at a barometric
pressure of 700 hPa to 1060 hPa and a relative humidity
of 15 to 75%.
MAINTAINING
AND CLEANING THE DEVICE
Maintaining and cleaning the device are relatively
simple
•
Always store the stimulator and its accessories in the case provided.
•
No maintenance is required for the stimulator. The lifespan of the device
may vary depending on the conditions of use, but it is generally around
5 years (5-year warranty on the devices); the accessories may need
to be changed beforehand depending on how the device is used
•
Never tamper with the device while in use.
•
Never expose the stimulator to water. Wipe the device with a damp
cloth as needed.
•
Use the silicone pouch to protect your stimulator at all times.
•
Disconnect wires and fittings carefully and properly.
•
You may leave the wires plugged into your stimulator between
treatments.
•
Battery
To maintain the battery amperage at its optimum level, the battery
should be removed from the unit when not in use for an extended
period (approx. 3 months).
•
If you use carbon electrodes, use a large amount of conductive gel and
prevent them from drying out by applying an adhesive tape (supplied
in the kit). Rinse the carbon electrodes and your skin after use. Never
use detergent to clean carbon electrodes
•
For self-adhesive electrodes, you can moisten them with a little water
after treatment to restore their adhesiveness. Keep them in an airtight
place (such as a plastic bag). It also is important to cover them with
their protective film after use and when they are not in use.
•
Probe (not included)
Clean the probe using soapy water or in accordance with
the manufacturer's instructions.
•
Contact the manufacturer for help with installing and using
or maintaining the equipment or to report any unusual events.
25
page
7
