15
LEDs and trigless locks are indicated by half-bright
<TRIG>
LEDs.
GRID RECORDING MODE
GRID RECORDING
is a method of composing where trigs are added by using the
[TRIG]
keys.
1
Enter
GRID RECORDING
mode by pressing the
[REC]
key. A lit red
<REC>
LED indicates
GRID RECORDING
mode is
active.
2
Select the track to which you want to add trigs by pressing the relevant
[TRACK]
button.
3
Place note trigs on the sequencer by pressing the
[TRIG]
keys. To add note values to trigs, press and hold a
[TRIG]
key while pressing a key on the
KEYBOARD
. To add a trigless lock, press
[FUNCTION]
and
[TRIG]
. To shift all trigs
a whole step left or right, press and hold
[function]
, then press
[arrow]
key left or right.
4
Press
[PLAY]
to listen to the sequence.
LIVE RECORDING MODE
LIVE RECORDING
mode is the second method of adding trigs to the tracks. In this recording mode, the
KEYBOARD
can
be played in real time to input trigs to the tracks. It is also possible to enter parameter locks in real time.
1
Hold
[RECORD]
while pressing
[PLAY]
to enter
LIVE RECORDING
mode. The sequencer will start to play and the
<RECORD>
LED will start to flash.
2
Enter trigs to the active track in real time by pressing the keys on the
KEYBOARD
.
3
Press
[PLAY]
to exit
LIVE RECORDING
mode while keeping the sequencer playing. If
LIVE RECORDING
mode is active
and
[REC]
is pressed,
GRID RECORDING
mode will be entered.
4
Press
[STOP]
to stop both the recording and the playback of the sequencer.
SEQUENCER FEATURES
PARAMETER LOCKS
Parameter locks is a powerful feature that allows trigs to have their own unique parameter values. All note trigs of a
synth track could for example have different pitch or filter settings. Parameter locks can be applied to all types of tracks.
1
In
GRID RECORDING
mode, press and hold the
[TRIG]
key of a trig to apply parameter locks.
2
Adjust the parameters you want to lock using the
DATA ENTRY
knobs. The graphics in LCD will become inverted for
the locked parameter and the locked parameter value will be displayed. The
<TRIG>
LED
of the locked trig will begin
to flash rapidly, indicating the trig now contains a parameter lock.
3
Remove a single parameter lock by holding
[TRIG]
+ pressing the
DATA ENTRY
knob of the locked parameter. By
removing a note trig and entering it again, all parameter locks will be erased from the trig.
4
In
LIVE RECORDING
mode, turn a
DATA ENTRY
knob to input parameter locks to the active track. Note trigs will be
locked accordingly and trigless locks containing the locks will be placed on the sequencer steps not containing note trigs.
TRACK TRANSPOSE
Tracks can be transposed in real time. The tracks that will be affected by this functionality are set in the
NOTE SETUP
menu, which is accessed by pressing
[FUNCTION]
+
[NOTE]
. The
TRK TRANSPOSABLE
setting in this menu needs to be
activated for the track to be affected by the transpositions.
To transpose, press and hold
[TRANSPOSE]
+ a
KEYBOARD
key. Select a different octave range to transpose to by press-
ing
[OCTAVE UP]
or
[OCTAVE DOWN]
.
If
[FUNCTION]
+
[TRANSPOSE]
are pressed, the transpose lock functionality will be activated. Transpose lock is indicated
by a full-bright
<TRANSPOSE>
LED. When this function is activated, the
[TRANSPOSE]
key will act as if constantly pressed,
enabling one-handed transpositions when pressing the
KEYBOARD
keys.
MULTI MAP
Multi map allows custom mapped keyboards splits, pattern trigging per key, Sound trig per key, MIDI trig of external
synths, and more. In the Multi map mode, for example, full analog drum kits, bass lines, and lead sounds can be played
simultaneously. Ideal for performances and live improvisations. The internal multi map trigs can also be recorded in the
sequencer. To activate the default multi map of the
KEYBOARD
, press the
[MULTI MAP]
key. To deactivate, press again.
A red LED above the button indicates if the multi map is activated (full bright) or deactivated (off).
Summary of Contents for Analog Keys
Page 1: ......