background image

8

EXPERIMENTING WITH PATTERNS

The Analog Keys is shipped with several preset patterns, kits and Sounds. To immediately start experimenting, just 

follow the instructions below.

1 

Switch on the Analog Keys.

2 

Press 

[PLAY] 

to listen to pattern A01.

3 

Select pattern A02, which is the second demo pattern, by first making sure bank group A-D is selected. The 

<BANK 

GROUP>

 indicates the selected bank group. If A-D is not selected, press the

 [BANK GROUP]

 key.

4 

Pressing 

[BANK A/E]

 + 

[TRIG] 

key 2 will make pattern A02 play once the currently playing pattern finishes. Pattern 

A03 is selected by pressing 

[BANK A/E] 

[TRIG]

 key 3 and so on.

5 

Mute tracks by pressing 

[FUNCTION] 

+ the 

[TRACK] 

key of the track you want to mute. Unmute by repeating the procedure.

6 

Press 

[STOP] 

to stop playback.

PERFORMANCE MODE

The 

PERFORMANCE

 mode makes it possible for the 

DATA ENTRY

 

knobs to control several 

PARAMETER 

page parameters 

at once. These parameter mappings are called a parameter macro.

1 

Make sure a pattern is playing.

2 

Press the 

[PERFORMANCE]

 key to access 

PERFORMANCE 

mode.

3 

Turn the 

DATA ENTRY

 

knobs and listen how the sound of pattern changes.

ADJUSTING PARAMETERS

Each track contains six 

PARAMETER 

pages. Parameters affecting the sound of the track are found here. 

1 

Make sure a pattern is playing.

2 

Press the 

[TRACK]

 key of one of the four synth tracks..

3 

To change the cutoff of the ladder filter, press the 

[FILTERS]

 key. The 

FILTERS 

page will open. The parameter labelled 

FRQ changes the cutoff of the ladder filter. Turn 

DATA ENTRY

 

knob A to change the parameter value.

4 

Try out the rest of the 

PARAMETER 

page parameters to experiment with the sound shaping possibilities.

5 

To reload the Sound to its original state, press 

[NO/RELOAD]

 + 

[SOUND].

6 

To reload the whole kit to its original state, press 

[NO/RELOAD] 

[KIT]

.

OVERVIEW OF THE ANALOG KEYS DATA STRUCTURE

+DRIVE

The +Drive is the non-volatile memory of the Analog Keys. It keeps up to 128 projects (thousands of patterns, kits and 

songs) stored internally. The +Drive also gives access to the +Drive Sound library, capable of storing 4096 Sounds. Every 

project has access to these Sounds.

128 PROJECTS

+DRIVE SOUND LIBRARY

4096 SOUNDS

4 GLOBALS

16 SONGS

128 PATTERNS

128 KITS

4 SOUNDS

FX

CV

SOUND POOL

128 SOUNDS

Summary of Contents for Analog Keys





















Reviews: