MEMORY RESET
Resetting the memory will intentionally delete all files
entirely from the databank.
1. Press and hold the ENTER key.
2. Locate the RESET hole on the bottom of the unit.
3. Insert the tip of a paper clip while the ENTER key is
still down.
4. Watch the display screen change to a full dot display.
5. Release the ENTER key.
6. Insert the tip of the paperclip again. The display screen
will return to normal and all the files will be deleted.
DISPLAY RESET
If at any time information on the display screen should
freeze and the keypad does not work properly, simply
press in the RESET hole on the bottom of the unit by
inserting the tip of a paperclip. (Do not press ENTER).
The display screen will unfreeze and your files will remain
intact in memory.
BATTERY REPLACEMENT
If your display screen begins to lose contrast it may be
time to replace the batteries. The four “AA” cell alkaline
batteries should last approximately one year based on
34