World Clock Mode
Setting display to World Clock mode
By pressing the ‘Stop’ button on the remote, the display will switch between the two Time Modes on
the display (Timer and World Clock). Press the ‘Stop’ button until both the colons are lit and the
display is timing up. The display should now be in the World Clock mode.
To further verify that the display is in World Clock mode, press and hold the Up or Down arrow
buttons on the remote.
If the brightness of the LED’s on the display changes with respect to the button pressed,
the display is in World Clock mode.
If the display does not change brightness when the Up or Down arrows are pressed and
held, then the display is in the Timer mode. Press the ‘Stop’ button twice to change to the
world clock (Pressing the stop button once will stop display form Timing. Pressing it a
second time will cause the display to toggle to the World Clock mode).
Setting the time on the World Clock
1.
With the display in World Clock mode, press the ‘Lock’ button on the remote.
2.
A digit on the display will begin to flash, press the ‘Up arrow’ button to increment the digit or
the ‘Down arrow’ to decrement the digit.
3.
Once the flashing digit is set to the desired value, press the ‘Stop’ button to move to the next
digit to edit.
4.
Once the display is set to the desired time, press the ‘Lock’ button on the remote to save the
time.
Changing the time format (12 or 24 hours)
With the display set to World Clock mode, press the ‘Down arrow’ button once. The display will
toggle between the two formats of time.
