Timer Mode
Setting the display to Timer mode
Press the ‘Stop’ button on the remote until the two sets of colons on the display are not turned on.
Setting the time in Timer mode
1.
With the display in Timer mode, press the ‘Lock’ button on the remote.
2.
A digit on the display will begin to flash, press the ‘Up arrow’ button to increment the digit or
the ‘Down arrow’ to decrement the digit.
3.
Once the flashing digit is set to the desired value, press the ‘Stop’ button to move to the next
digit to edit.
4.
Once the display is set to the desired time, press the ‘Lock’ button on the remote to save the
time.
Controlling the display in Timer mode
Press the ‘Up arrow’ button to
Time Up
.
Press the ‘Down arrow’ button to
Time Down
.
If the display is timing, pressing the ‘Stop’ button will cause the current time to
Pause/Hold
.
Adjusting Display Brightness of Display
With the display in World Clock mode:
Press and hold the ‘Down arrow’ button to
decrease the brightness
of the display.
Press and hold the ‘Up arrow’ button to
increase the brightness
of the display.
______________________________________________________________________________________
Please visit our website for more information:
www.electronicdisplays.com
Or Call: 1-800-367-6056
Or Our Support Website:
http://edisupport.helpserve.com/
