Belt adjustment
Your treadmill belt has been adjusted at the factory but each user has a tendency to be “Right” or “Left”
footed. If the belt moves to either side, it needs to be adjusted. There are two adjustment bolts at the rear
of the unit (see Fig.3). Tighten by half a turn the bolt on the side towards which the belt has shifted and
correspondingly loosen the bolt on the other side. Rotate the belt smoothly to ensure that it is correctly
centered - if not,repeat the adjustment.
Maintenance
The belt may be cleaned with a mild soap and water. Be sure to remove any excess water after cleaning.
Clean the running board under the belt periodically with a household furniture polish. After cleaning, a small
amount of silicone spray (available from motor shops) should placed on the surface of the running board to
allow the belt to slide more easily.
