Location of Controls
1.
Dust Cover
2.
Left Speaker
3.
Pitch Adjust
4.
3.5mm Earphone jack
5.
Power LED Indicator
6.
Power On/Off Switch
7.
Auto Stop Switch
8.
Right Speaker
9.
Volume Control Knob
10.
Tone Control Knob
11.
45 RPM Record Adaptor
12.
Turntable Speed Selector
13.
Tone Arm Rest/Holder
14.
Line Out Socket (L/R)
15.
Aux In jack
16.
AC Power Cord
17.
USB Port For Computer Connection
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.This unit should not be adjusted or repaired by anyone except qualified
service personnel.
Precautions for Use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit
for ventilation.
Connection
1.
Connect the Power Cord (16) to an AC outlet.
2.
To encode the Vinyl or Aux in signal to your computer, connect the USB Port (17) of the Turntable
to a suitable USB port on your computer via the USB cable provided.
3.
Turn on the power by Power On/Off switch (6) and the power LED indicator (5) will light up, your
system is now ready to play your music. Please refer to the Operations section of this Manual for
details.
