24
EnAct
Sub Name
In Dwell Out Mode Source
105 House Lights
Manual
Enter:
Fdr:
1 2
3
4
5
6
7
8
Sub Number
Cue:
%:
--/--S
/
/
/
/
/
/
/
Sub Name
In Dwell Out Mode Source
105 House Lights
Manual
Enter:
Fdr:
1 2
3
4
5
6
7
8
Sub Number
Cue:
%:
--/--S
/
/
/
/
/
/
/
If the setup switch "Recording in fast mode" is enabled
(System menu, #5, page 39), recording is as follows:
RECORD SUBMASTER 105 (page 1, handle 5):
Press
NOTE: If no page is given, Page 1 is assumed.
Submaster Window
RECORD SUBMASTER 206 (page 2, handle 6):
Press
RECORD SUB 108 (with In and Out time of 5 and zero Dwell):
Press
To change the times or any other attributes, press
TIME
after
submaster number. The cursor will move to the up-time position.
To move about use the
TIME
key or the curson keys.
Any ENTER press will finish the record.
Attributes: (Use SELECT key to toggle through options).
Name:
Any 16-character name.
In:
For timed submasters. The time it takes to simulate
a handle movement from zero to full.
Dwell:
For timed submasters. The time the simulated
handle is at full.
Out:
For timed submasters. The time it takes for the
simulated handle to move back to zero.
Mode:
Manual: Sub follows handle, bump button takes
handle to level set in setup.
Timed: Sub simulates an up, dwell and down
handle movement. Bump button starts and
pauses.
Advancing: When sub level moves above zero then back, the
sub page number will automatically advance to
the next valid submaster. Can be manual or timed.
Disabled: Sub does nothing.
Source:
Indicates where submaster was recorded.
STAGE SCREEN
RECORDING SUBMASTERS
RECORD SUB 103 AS ADVANCING:
Press
Cursor to Mode and use SELECT to
find Advancing, then ENTER.
CHANGE OR ADD TIMES:
Cursor to position or press TIME, then enter UP, DWELL,
DOWN times.
LABEL SUBMASTER:
Cursor to Name. From optional keyboard, type name. When
complete, press ENTER on control keypad.
5
Submaster Label
