4
EnAct
OVERVIEW
FRONT PANEL
1
2
3
4
5
6
7
8
9
1. PLAYBACK HANDLES:
Manual control of Submaster playbacks.
2. PLAYBACK BUMP BUTTONS:
Starts timed Submaster playbacks and bumps manuals to a Full
level.
3. EFFECTS CONTROLS:
Time and Level control for the running effects.
4. FADER TAKEOVER BUTTONS:
Captures active fades to a handle and unloads uncompleted
fades from the Faders.
5. MANUAL FADER CONTROLS:
Adjusts fade level from the point captured to Full.
6. COMMAND KEYPAD:
Moves through screens, enters values, and starts functions.
7. ENCODER WHEEL:
Adjusts selected channel levels, and speeds up / slows down
fades.
8. KEY SWITCHES:
Key access to power, record and backup functions.
9. DISK DRIVE:
Off-line storage of recorded show information.
KEYPAD LAYOUT
Fader Keys
Action Keys
Macro Keys
Action Keys
Command Keys
Number Keys
Selection Keys
Screen Keys
EnAct
The EnAct is a microprocessor-based control system with
all operational instruction sets and controls routines embedded
in read-only memory. The Control Console front panel allows
access to these instructions and routines through key
selections. All key selections are echoed on the system
Command Line located at the bottom left of your monitor.
The primary access to the control system is through the
keypad controls on the front panel of the console. The keypads
are grouped together under common control headings for
ease of operation. There are seven groups: Screen Keys;
Action Keys; Command Keys; Number Keys; Selection Keys;
Fader Keys and Macro Keys.
The general titles for the grouping of keys indicate their
functions.
