BRICK/CONCRETE WALL FITTING INSTRUCTIONS
•
Select a suitable position to mount the arm.
•
Use a stud detector to check for hidden cables, pipes or steelwork.
•
Attach the spirit level (I) to the frame.
•
Place the arm against the wall and mark the holes required. Use the spirit level (I) to
keep the frame horizontal.
•
Drill the holes with a 10mm diameter drill bit to a depth of 50mm.
•
Insert the wall plugs (G).
•
Attach the arm to the wall using the 6, 6x50mm bolts (F) and M8 washers (H), the
bolts should be tightened using a 12mm / 1/2 inch socket wrench or spanner.
ATTACHING BRACKETS TO TV
The A195FF TV bracket comes with a range of TV mounting accessories designed to fit
the majority of televisions. Depending upon the required parts it may be necessary to use
screws A, B or C with the square washer (E) and spacer (D). The washer has two holes,
one for screws A & B and a larger one for screw C.
50mm
10mm
F
D
AB or C
E
I
H
G
