2.28.
Make sure that you can come to the mains plug of the appliance.
Do not pull the mains cable.
2.29.
If the power plug socket is loose, do not insert the power plug.
There is a risk of electric shock or fire.
2.30.
You must not operate the appliance without the lamp.
2.31.
This appliance is heavy. Care should be taken when moving it.
2.32.
Do not remove nor touch items from the freezer compartment if
your hands are damp/wet, as this could cause skin abrasions or
frost/freezer burns.
2.33.
Avoid prolonged exposure of the appliance to direct sunlight.
3. Description of the appliance
See
“FIG.1”
1) Freezer door
2) Control panel
3) Glass shelves
4) Crisper cover
5) Crisper
6) Balconies
4. Assembling / Installation
4.1. Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance.
Climate class Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
The appliance should be installed well away from sources of heat
such as radiators, boilers, direct sunlight etc.
Warning!
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily accessible
after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown
on the rating plate correspond to your domestic power supply. The
