background image

9

© Elektro-Automatik GmbH & Co. KG

EN

About & Copyright

User instruction manual for Guard LCD 2 UPS series

EA Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-37
41747 Viersen
Germany

Phone:   +(49) 02162 / 37850

Fax:     +(49) 02162 / 16230
Web:     www.elektroautomatik.de
Mail:     ea1974@elektroautomatik.de

© Elektro-Automatik
Reprint, duplication or partly, wrong use of this user 

instruction manual are prohibited and might be followed 

by legal consequences.

Date: July 2018

        

Important notes:

This manual contains important safety instructions. 

Please follow up all instructions carefully during instal

-

lation. Read this manual thoroughly before attempting 

to install or operate.

CAUTION! 

To prevent the risk of fire or electric shock, 

please install the unit in a temperature and humidity 

controlled indoor area, which is free of conductive 

contaminants.

CAUTION!

 Risk of electric shock. Do not remove the 

cover. No user serviceable parts inside. Refer servicing 

to qualified service personnel. 

CAUTION! 

Risk of electric shock. Hazardous live parts 

inside  this  UPS  can  be  energized  from  the  battery 

supply even when the input AC power is disconnected.

CAUTION! 

Risk of electric shock. The battery circuit 

is not isolated from AC input, hazardous voltage may 

exist  between  battery  terminals  and  ground.  Please 

test it before touching.

Summary of Contents for Guard LCD 2 Series

















Reviews: