13. GLOBAL MENU
51
13. GLOBAL MENU
The GLOBAL menu offers settings that affect Analog Rytm on a global level. Global sequencer, MIDI and
track routing settings are made here. Up to four Global slots are available, each with its individual settings.
Access the menu by pressing
[FUNCTION]
+
[TRACK]
. Scroll the list by using
[UP]
/
[DOWN]
or the LEVEL
knob. Open a highlighted menu by pressing
[YES/SAVE]
.
13.1 PROJECT
This is where you manage the projects. This menu is covered in the section “9. PROJECTS” on page 25.
13.2 SAMPLES
Manage your samples here. On the main screen, seen below, you can access one of two main directories,
FACTORY or INCOMING. In the FACTORY directory, several preset samples can be found in one of the ten
subdirectories. The INCOMING directory, on the other hand, is the default destination for samples sent to
the Analog Rytm +Drive storage via the C6 utility software. Press
[YES/SAVE]
to open a directory.
To open a subdirectory, simply highlight it using the
[ARROW]
keys and press
[YES/SAVE]
. To exit a direc-
tory, select the item labeled “..” at the very top of the screen and press
[YES/SAVE]
. Do this repeatedly to
return to the top of the directory hierarchy. To discern directories from sample files, all directories, including
the directory exit row, “..”, are labeled with a (D) at the very end of the row. When browsing a directory in
the +Drive, a sample assigned to one of the 127 sample slots of the active project will have its slot number
shown within brackets, as seen below.
13.2.1 LOADING, UNLOADING OR REPLACING A SAMPLE
The following is an example of how to load one or several of the preset samples to the active project.
First, open the FACTORY directory. Second, open the PERCUSSION directory (the seventh item in the
list). Here, highlight the first sample, “Agogo High” and press
[YES/SAVE]
to tick it. Browse the list and
tick a few other samples. Any sample may be previewed (played back by the voice of the active track) by
first highlighting it and then pressing
[FUNCTION]
+
[YES/SAVE]
. Circa, ten seconds of the sample will
be previewed. Third, press the
[RIGHT]
arrow key. A menu will appear on the right side of the screen.
