15. SETTINGS MENU
65
CLOCK RECEIVE
sets whether or not Digitakt responds to MIDI clock sent from external devices.
CLOCK SEND
sets whether or not Digitakt transmits MIDI clock.
TRANSPORT RECEIVE
sets whether or not Digitakt responds to MIDI transport messages sent from
external devices.
TRANSPORT SEND
sets whether or not Digitakt transmits MIDI transport messages.
PRG CH RECEIVE
will, when active, make Digitakt respond to incoming program change messages,
which is useful when wanting to select patterns externally. The MIDI channel that will listen to incom-
ing program change messages is set in the MIDI CHANNELS menu. For more information, please see
PRG CH SEND
will, when active, send program change messages when patterns are changed. The
MIDI channel that will send program change messages is set in the MIDI CHANNELS menu. For more
information, please see “15.3.3 CHANNELS” on page 66.
15.3.2 PORT CONFIG
Here you find the MIDI port related settings. Change settings by using the
[LEFT]
/
[RIGHT]
arrow keys.
TURBO SPEED
press
[YES]
to start the turbo speed negotiation. Speed is chosen automatically. Please
note that you must use a MIDI interface that supports the Turbo-MIDI protocol.
OUT PORT FUNCTIONALITY
selects what type of signal the MIDI OUT port will send.
•
MIDI
makes it possible for the port to send out MIDI data.
•
DIN 24
will make the port send DIN 24 sync pulses. No MIDI data is transferred over the port when
this option is selected.
•
DIN 48
will make the port send DIN 48 sync pulses. No MIDI data is transferred over the port when
this option is selected.
THRU PORT FUNCTIONALITY
selects what type of signal the MIDI THRU port will send. The settings
are the same as for OUT PORT FUNCTIONALITY.
INPUT FROM
selects the source Digitakt will receive MIDI data from.
•
DISABLED
will make Digitakt disregard any incoming MIDI data.
•
MIDI
will make Digitakt listen only to MIDI data sent to the MIDI IN port.
•
USB
will make Digitakt listen only to MIDI data sent to the USB port.
•
MIDI+USB
will make Digitakt listen to MIDI data sent to both the MIDI IN and USB ports.
OUTPUT TO
selects the destination to which Digitakt will send MIDI data.
•
DISABLED
will stop Digitakt from sending out any MIDI data.
•
MIDI
will make Digitakt send MIDI data to the MIDI OUT port only.
•
USB
will make Digitakt send MIDI data to the USB port only.
•
MIDI+USB
will make Digitakt send MIDI data to both the MIDI OUT and USB ports.
Summary of Contents for Digitakt
Page 1: ...Digitakt User Manual...
Page 84: ...4116ENG O...