14. SAMPLING
59
7. Press
[SRC]
access the SOURCE menu, and then use
DATA ENTRY
knob
D
to select the sample you
want to load.
8. Press
[YES]
to load the sample to the track.
For more information, please see “15.2 SAMPLES” on page 61.
14.5 SAMPLE PLAYBACK
Once the sample is assigned to a track, it can be triggered either by the sequencer or manually by pressing
a
[TRIG]
key. You also have the ability to set the samples play mode and edit what portion of the sample is
played.
1. Press
[SRC]
to access the SOURCE page.
2. Use
DATA ENTRY
knob
B
to set the
PLAY MODE
behavior of the sample.
• REVERSE
The sample will be played back in reverse once every time it is trigged.
• REVERSE LOOP
The sample will loop continuously in reverse between Loop Position and Length.
How long it will loop for is set with the LEN parameter on the TRIG page. The loop time is also con-
strained by the AMP page envelope parameter settings
HLD
and
DEC
.
• FORWARD LOOP
The sample will loop continuously between Loop Position and Length. How long it
will loop for is set with the LEN parameter on the TRIG page. The loop time is also constrained by the
AMP page envelope parameters
HLD
and
DEC
.
• FORWARD
The sample will be played back once every time it is trigged.
3. Use
DATA ENTRY
knobs
E
,
F
, and
G
to set the
STRT
,
LEN
, and
LOOP
parameters which define what
portion of the sample is played. Press
[SRC]
twice to access SRC page 2, in order to more easily see
these settings using the sample waveform. For more information, please see “11.4 SRC PAGE 2” on
4.
• STRT
Start sets the start position for the playback of the sample.
• LEN
Length sets the length of the playback of the sample. Start + Length effectively defines the end
point of the portion of the sample that is played.
• LOOP
Loop Position sets the position in the sample to where playback will return after reaching the
Length Position (defined by
STRT
+
LEN
) if
PLAY MODE
is set to FORWARD LOOP or REVERSE
LOOP. The sample then loops between the end of
LEN
, and
LOOP.
For more information, please see “11.3 SRC PAGE 1” on page 41.
Summary of Contents for Digitakt
Page 1: ...Digitakt User Manual...
Page 84: ...4116ENG O...
