KERCOMET 170
and
210, MULTIMIG 150
Start-up
21
13.5 Main parameters
Tab. 1:
Main parameters
13.6 Secondary parameters
Press the mode key 60 for at least 2 sec-
onds.
The 7-segment display 47 displays the
secondary parameter code and value al-
ternately (
KERCOMET 170 / MULTIMIG 150
).
The 7-segment display 47 displays the sec-
ondary parameter value, the 7-segment
display 55 displays the secondary param-
eter code (
KERCOMET 210
).
Press the mode key 60 until the required
secondary parameter code is displayed.
Set the required secondary parameter value
using turning knob 61.
Exit the secondary parameter by pressing
the mode key 60 for at least 2 seconds.
Tab. 2:
Secondary parameters